1. Full exterior wash, starting with the wheels and wheel arches. Then moving on using a citrus pre-cleaner and snow foam pre-wash, followed by a 2 bucket safe hand wash of the vehicle.

2. Chemical and mechanical decantamination then happens, this is by use of our Tar & Glue Remover, and a Fall Out Remover after and rinsed back down. The vehicle is then gone over with a clay bar to remove any other bonded contamination that may still be on the vehicle after the chemical decon steps, and is then rewashed, rinsed and dried thoroughly to make sure no remaining chemicals are left on any surfaces.

3. The vehicle is then masked to ensure any sensitive areas (like rubber seals, plastic trims etc) are protected from damage due to machine polishing.

4. Paint depth readings are taken followed by test spots are carried out to find which compounds and polishing pad pairs will provide us with the best result for both stages of our machine polishing processes.

5. The paint enhancement process is carried out in the form of a single stage of machine polishing with the selected compound and pad from the test patches to reach the desired results.

6. The vehicle is then protected using a wax, sealant or ceramic/nano-coating of choice. This can be selected from our wide range of options depending on the desired result of durability or gloss.

7.All finishing touches are then carried out, for example; glass areas cleaned inside and out, trims dressed, all tires dressed, all exterior metal surfaces treated etc.